100% DelighteD…guaranteeD.
You’ve got your OttLite product—sweet! It’s important to us
that you are 100% delighted with our products from day one
and beyond. Register your product using the enclosed Product
Registration Form or online at
Warranty.OttLite.com
, and if
anything ever happens to your OttLite we’ll be able to help you
lickety-split.
WARNING:
To prevent electric shock, make sure the lamp is
not plugged in until all assembly steps are complete.
laMP aSSeMBlY
1.
Make sure the lamp is not plugged into an electrical socket.
2.
Attach clip to table, shelf or other strong, solid surface.
3.
Plug lamp into a standard 120V socket. Your lamp is ready
for use.
4.
To turn the lamp on or off depress the rocker switch located
in the cord mounted power box.
tuBe inSertiOn/rePlaCeMent
1.
Make sure the lamp is not plugged into an electrical socket.
2.
If the lamp has been in use, allow it to cool for
approximately 5 minutes before proceeding.
3.
Rotate the shade
(D)
so that the notch in the base of the
shade is positioned over the tab
(C)
located on the socket
housing
(A)
. Refer to the diagram for proper shade position.
4.
Remove the shade
(D)
by pulling it straight out from the
socket housing
(A)
.
5.
To install a tube in the socket
(B)
, grasp the tube firmly in
your hand, position the tube so that it is aligned as pictured
in the diagram, then push the tube straight into the socket
until it “snaps” into place.
6.
To remove a tube already installed in the lamp, grasp it
firmly in your hand and pull it straight out of the socket
(B)
.
Do not twist or turn the tube while removing it from
the socket.
7.
To replace the shade
(D)
, position it as indicated in the
diagram, then push it back into the socket housing
(A)
,
making sure the shade “snaps” into place.
8.
Rotate the shade
(D)
to the desired position for use.
Please note that in operation, OttLite
®
tubes are not
dimmable.
enjoy your 13w WingShade Clip-On lamp!
This lighting system is designed for use with OttLite type
(style number PL13-E). Use of other products voids
the warranty and may result in damage to the lighting
system.
For more information on purchasing replacement tubes/bulbs
please go to www.OttLite.com/replacement13wtube
CAUTION!
If the external flexible cable or cord of
this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or its service agent or a similar qualified person in
order to avoid a hazard. Indoor use only.
CAUTION!
To prevent electric shock, match wide blade of
plug to wide slot, fully insert.
CAUTION! ImpOrTANT sAfeTy
INsTrUCTIONs:
This portable lamp has a polarized plug (one blade is wider than the
other) as a feature to reduce the risk of electric shock. This plug will
fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Never use with an extension cord unless plug can be fully
inserted. Do not alter the plug.
This product complies with Part 18 of FCC Rules, but may cause
interference to radios, televisions, wireless telephones, and
remote controls. Avoid placing this product near these devices. If
interference occurs, move the product away from the device or plug
either into a different outlet. Do not install this product near maritime
safety equipment or other critical navigation or communication
equipment operating between 0.45-30 MHz.
English
13w WingShade Clip-On Lamp
INS120053 REV012313
13w WingShade Clip-On Lamp
K75008 GX7909
