pullman Ermator I2000T, Operation Instructions Manual

Page: 7 / 25

Revision 2 6
Introduction
Dear Customer,
Thank you for choosing Pullman-Ermator AB as your supplier.
We hope that the Pullman-Ermator I940T/I2000T will be to your satisfaction and meet your
expectations.
Pullman-Ermator has been manufacturing professional dust extractors since 1966 and has over the
years acquired a genuine technical knowledge in this area. We are continuously striving to improve in
our product segment and will continue to supply the market with new equipment.
Please feel free to browse information about our product programme on our web site
www.Pullman-Ermator.se .
Notice!
These instructions are only for the Pullman-Ermator I940T/I2000T.
The Pullman-Ermator I940T/I2000T can only be used with dry or wet (combination filter), non-
explosive material.
Pullman-Ermator will not be held responsible if the dust extractor is used for other applications
or been used in ways other than those outlined in this instruction manual.
Pay particular attention to the safety regulations
Read the complete instruction manual before using the dust extractor.
All spare parts used with the I940T/I2000T must be those specified by Pullman-Ermator AB