pullman Ermator I2000T, Operation Instructions Manual

Page: 11 / 25

Revision 2 10
Problem solving
I940T/I2000T is designed and manufactured for a severe environment and tasks, but the user must
note that the machine components must be protected from knocks and blows. Filter, seals,
attachments, and connections are carefully adapted and selected with regard to the operator’s work
environment. Therefore, the operator and service personnel must treat the machine with care if it is to
work correctly for many years.
Problem Cause Procedure
Ejector doesn´t start Low feed pressure Bigger Compressor
Ejector runs, but no suction Hose not connected Connect the hose
Hose blocked Clean the hose
Ejector works, but Hole on the hose Change hose
poor suction Blocked filter Change filter
Suction unit loose Adjust
Dirt in the hose or Clean the hose and intake
intake
Defect sealings Change current sealing
Dust is blowing from motor Defect or loose filter Adjust or change
Abnormal noise Order service
KEEP THESE INSTRUCTIONS!