pullman Ermator I2000T, Operation Instructions Manual

Page: 10 / 25

Revision 2 9
Change of filter
Proper personel protective equipment must be used.
1. Lift off the filterholder with the filter.
2. Loosen the fingernut and remove the filter cap and filter.
3. Check the sealing on the filterholder.
4. Assemble the new filter.
5. Same procedure for dustfilter
6. Clean all other parts.
Service
When cleaning and servicing the machine, You must switch off the machine and disconnect the
compressed air.
•
Avoid cleaning with high pressure cleaner. If necessary do not point at the openings on the
machine, especially the opening for the cooling air.
•
Before moving the machine from the working area, the machine must be cleaned. Furthermore
must the inlet be locked with the expanding plug attached.
•
All other equipment must be regarded contaminated and be treated thereafter.
•
If possible use a special suitable room.
•
Proper personel protective equipment must be used.
•
All parts after service, which are contaminated, must be taken core of in a proper way in plastic
bags according to all regulations.
•
If the vacuum cleaner has to be used for other purposes, it is extremely important that the vaccum
cleaner will be cleaned, to avoid spreading of hazardous dust.
Accessories
Part.no. Description No/Machine
1220001 23 DUST FILTER (DIA 400) 1 pcs
1220006 400G COMBINED FILTER, with screen (DIA 400) 1 pcs
4228086 TH55/10 DISPOSABLE BAG (10 PCS) 1 pcs
For other spare parts, see the enclosed spare parts list.
Warranty
All Pullman-Ermator devices and accessories have a 12-month factory warranty for material and
manufacturing defects. The warranty extends to 36 months when returning the attached warranty slip.
Do not attempt to repair the suction apparatus without the consent of the manufacturer.
The warranty does not cover defects which are the result of normal wear and tear, negligence,
defective use, unauthorised repair or the suction apparatus being connected to the incorrect voltage.
In the event of any complaint, the suction apparatus or an agreed part of it must be returned to us or
our authorised representative for warranty examination and for any warranty repair or replacement.