(Image) 0A1 Watch Operation Guide 0
Document Version V1.0
Operating instructions
8
3.
Product use
3.1
Binding gateway and robot
When the caller is used for the first time, the gateway is not bound, and the calling
robot can reach the designated location only after the gateway is bound.
The calling device is set and operated through the data line to realize the binding of
the calling device and the gateway.
The gateway is bound to the robot through the network.
3.2
Description of call function and indicator light
Stand-alone call button, the indicator light turns blue and flashes, indicating
that the call request has been received and the robot is being called.
When the robot is idle and the call is successful, it can go immediately, and
the indicator light jumps to green.
The robot is busy and needs to wait. At this time, the call request enters the
queuing stage, and the indicator light jumps to the blue light.
The robot has reached the designated call point, and the indicator light
jumps to green.
After the call, the customer can cancel the call by pressing the pager for 5S.
After the call is cancelled, the indicator light will turn red and remain on.
If the call fails due to other reasons other than the cancellation of the caller,
the indicator light jumps to red and flashes.
Indicator
type
Light time
Explain
The
blue
light
is
flashing
5s
Stand-alone call button, the caller starts calling the robot
The
blue
light
is
always on
5s
Call request in queue
The
green
light
is
always on
5s
The call has been answered and the robot is on its way.
The
green
light
is
flashing
5s
The robot has arrived
The red light
is flashing
5s
The call failed
