51
Rev 1.2 7/15
Network Camera Control Protocol
1.
Setup camera for IP
(first see “Setting up the Camera’s IP” section above)
Control Notes:
PTZ over TCP/UDP:
The camera currently supports various PTZ control methods, including RS232, RS485, IR remote control, web interface,
HTTP-CGI and TCP /UDP protocol.
The camera includes an internal TCP server. The default port number is 5678. When client and server set up a TCP
connection, the client sends PTZ command to the internal server and the server will then parse and execute the PTZ
commands.
The camera includes an internal UDP server. The default port number is 1259. When client and server set up a UDP
connection, the client sends PTZ command to the internal server and the server will then parse and execute the PTZ
commands
The PTZ command format is based on the VISCA protocol as shown below:
The command presentation format used below is:
Control Command Group
Command Function Command Packet Note
Command Function Command Packet Note
…
CAM_Zoom
Stop 8x 01 04 07 00 FF
Tele(Standard) 8x 01 04 07 02 FF
Wide(Standard) 8x 01 04 07 03 FF
Tele(Variable) 8x 01 04 07 2p FF
p = 0(low) - 7(high)
Wide(Variable) 8x 01 04 07 3p FF
Direct 8x 01 04 47 0p 0q 0r 0s FF pqrs: Zoom Position
CAM_Focus
Stop 8x 01 04 08 00 FF
Far(Standard) 8x 01 04 08 02 FF
Near(Standard) 8x 01 04 08 03 FF
Summary of Contents for 12x-SDI
Page 1: ...PTZ Optics 12x SDI User Manual V1 2 English...
Page 39: ...36 Rev 1 2 7 15...
Page 59: ...56 Rev 1 2 7 15...
