35
Rev 1.2 7/15
IP camera viewing and control via IP
1
Setting up the camera’s IP address:
1.1
Connect the Camera to the network (or PC). Turn on the camera power. The current IP address can be searched via the
“Upgrade” software (software upgrading tool, named “upgrade_En.exe” or “upgrade.exe” that can easily be downloaded
http://www.ptzoptics.com/downloads/
web site). Run “upgrade.exe”. Click the [Search] tab. Click the “Search”
Button. The software will show the camera's IP address, subnet mask, network gateway and the camera’s MAC address, as
shown below:
If you have multiple cameras on the network, you can identify the camera you are working with by disconnecting and
reconnecting the camera to see which MAC address belongs to that camera.
To set the IP address for the camera to work within your network environment, click the [config] tab or right click the listing
in the [search] tab and select “config”.
Summary of Contents for 12x-SDI
Page 1: ...PTZ Optics 12x SDI User Manual V1 2 English...
Page 39: ...36 Rev 1 2 7 15...
Page 59: ...56 Rev 1 2 7 15...
