11
Rev 1.2 7/15
3. Focus Control
AUTO: Change focus mode to AF, which allows the
camera to adjust the focus automatically on the center of
the image.
MANUAL: Change focus mode to MF, which allows the
user to adjust the focus manually (see FOCUS FAR &
FOCUS NEAR).
FOCUS FAR: Press [FOCUS+] button (NOTE: Effective
only in MANUAL focus mode)
FOCUS NEAR: Press [FOCUS-] button (NOTE:
Effective only in MANUAL focus mode)
Press and hold
the FOCUS FAR or FOCUS NEAR
button, allows for continuous adjustment, stopping as
soon as the button is released.
4. Backlight Switch
BLC ON/OFF: Press this button to enable the backlight
compensation. Press it again to disable the backlight
compensation. (Note: Backlight is only effective in full
auto exposure mode)
5. Presets - Setting and Clearing
1. To store a preset position: The user should manually
setup the shot and then press the [SET PRESET] button
first and then press the numeric button 0-9. Ten total
preset positions (0-9) are available from the IR remote
control (245 available via RS232/RS485/IP Interface).
2. To erase the memory content of a preset position: The
user should press the [CLEAR PRESET] button first and
then press the numeric button 0-9 associated with that
preset.
Note:
Pressing [*]+[#]+[CLEAR PRESET] in sequence
will erase all presets in the memory.
Summary of Contents for 12x-SDI
Page 1: ...PTZ Optics 12x SDI User Manual V1 2 English...
Page 39: ...36 Rev 1 2 7 15...
Page 59: ...56 Rev 1 2 7 15...
