NORMI 13 (T42023)
Operating Manual - Accessories
26
D703.131.00/03 en
4 Accessories
4.1
Use of the Bucky
Mounting Device T20005
with a Test Object
Assembly
•
Place the test object with the PMMA absorber
(30 mm) and the bucky mounting device
T20005 on a suitable table.
•
Place the NORMI 13 test object on the PMMA
absorber. Join both components by means of
four knurled screws.
•
Undo the screws of the bucky mounting
device.
•
Then use the two star knob bolts (
4
to fix the PMMA absorber (threaded bores
on the sides) on the bucky mounting device
T20005.
•
Using a ruler or the edge of the table, align the
height of the test object in the bucky mounting
device.
•
Set the angle bracket for fitting the bucky
mounting device to the thickness of the wall
bucky.
•
Tighten the star knob bolts on the bucky
mounting device.
•
Holding the assembled bucky mounting device
with both hands, suspend it in the wall bucky.
It may prove necessary to adjust the position
of the bucky mounting device.
Disassembly
•
Holding the assembled bucky mounting device
with both hands, lift it off the wall bucky. To fur-
ther disassemble the bucky mounting device,
place it on a suitable table.
•
Unscrew the star knob bolts (
4
,
) and
remove the test object.
