HDMI/IR/RS232 Twisted Pair PoC Extender
PTN Electronics Limited 3 www.PTN-electronics.com
2.2 Appearance of TPHD402PR
1)
ON: Working status indicator, blink green when the device works fine, turn off when
the device stops working.
2)
LINK: Twisted Pair link status indicator, illuminate green when the connection is
successful.
3)
IN: HDCP compliance indicator, illuminate green when the connected device
supports HDCP and work normally; blink green when the connected device does
not support HDCP.
4)
POWER LED: Illuminate red when power on.
5)
HDBT IN: Connect to the HDBT OUT port of TPHD402PT with a CAT5e cable.
6)
HDMI OUT: Connect to HDMI display device.
7)
IR IN: Connect with IR receiver, the IR signal received from this port can only send
out via TPHD402PT.
8)
IR OUT: Connect with IR transmitter, the sent IR signal are received by
TPHD402PT.
9)
RS232: Serial port, 3-pin captive screw connector, connects with the control
terminal, supports bi-directional RS232 control.
10) DC 24V: Connect with power supply (Not necessary if TPHD402PT connects with
power).
Note:
Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
