Digital Conference System (D-3002)
Step2.
Use Up and Down button to switch between Storage and Open, select one
option, and press Enter button to enter into audio record setting interface.
a)
Select Storage in Figure 4-16:
Figure 4-17 Storage Location Selection
Use Up and Down button to scan the two options (Ports and Capacity), select one
option you need and press Enter button to confirm your selection.
Ports
(for storage location):
Figure 4-18 Storage Location Priority Selection
Select the storage location you need (it will be set as the default location for recorders).
Capacity
(for checking the remaining storage space):
Figure 4-19 Storage Capacity Checking
You can check the size of the recording file and its remaining time.
b)
Select Open in Figure 4-16, it will enter the interface shown as below:
Figure 4-20 Begin/stop Audio Recording
Start
: start to record
Stop
: stop recording
When you insert your storage (SD card or USB flash disk), the system will pop up an
interface like Figure 4-19 and show you the capacity of this storage and the remaining
recording time. After 2 seconds, it will exit this interface.
19
