Digital Conference System (Controlled by D-3001)
18
press Enter button to enter into the following interface:
Figure 2-31 ID Setting
Step2.
Use Up and Down button to set the firs t ID (value ranges from 1 to 249), and
then press Enter button. Then it will set IDs for all the connected discussion
units automatically.
Figure 2-32 ID State
Step3.
In ID setting state, all LED indicators on discussion unit will blink, please press
any button (but not the Priority button on chairman unit) to make D-3001 able to
recognize your unit and set ID for your unit.
Then the LED indicators will be off, and the LCD screen will show you the
message that your ID is successfully set. And the ID will be showed on the
D-3001.
Step4.
After finishing setting IDs for all units, please press Exit button. Then the
D-3001 will automatically begin to initialize. After the initialization, it will return
to the Manually ID Setting interface.
9)
System Parameters Setting
Use Up and Down button to switch to
“System Param”, and then press Enter button to
enter into the following interface:
Figure 2-33 System Parameters
Note :
Onl y when the first ID is A001 and the A001 unit is a chairman unit, will this
chairman unit be able to control other units in off-line state.