T•FOLD User Guide
Page 32
2. Visually inspect area exposed by removal of top cover for any other shipping tape / materials,
and carefully remove if found.
3. Visually inspect remainder of
T•FOLD
for any other shipping tape / materials, and carefully
remove if found.
4.
Failure to remove all shipping tape before powering up the
T•FOLD
may result in catastrophic
damage to the
T•FOLD
drive mechanism.
3.5
Basic Operations
Some basic
T•FOLD
operations are described here as they are referred to in the Initial Setup
instructions.
3.5.1
Switching the T
•FOLD
ON
1.
Plug the supplied mains cord into the socket at the rear of the
T•FOLD
and switch the power
switch at
T•FOLD
socket to the “ON” position.
Failure to remove the shipping tape before powering up the
T•FOLD
may result in
catastrophic damage to the
T•FOLD
drive mechanism.
2.
Plug the other end of the power cord into the wall socket and turn ON.
Pay attention to the following when handling the power cable:
Do not do anything forcefully (e.g. pull, bend, twist) on the power cable
Do not place heavy objects on the power cable
Do not route the power cable near heat sources
FIGURE 3-9 SWITCHING T-FOLD ON
Summary of Contents for T-FOLD
Page 1: ......
