background image

T•FOLD User Guide

 

Page 30 

 

Avoid the following temperature and humidity conditions. Otherwise, printed images may appear 
differently from what you expect and machine operation may be erratic or incorrect.  

Places where sudden changes in temperature or humidity are expected, even if the condition is
within the range specified within this document.

Places where direct sunlight or excessive lighting conditions are expected.

Places where air conditioners blow directly.

Impression Technology strongly recommends that the 

T•FOLD

 should be installed where air 

conditioning airflow, humidity and temperature can be adjusted easily. 

3.3.2

 

Required Space 

Install the 

T•FOLD

 on a flat surface that meets the following conditions: 

The load bearing surface will fully support the full weight of the 

T•FOLD

 (and/or stand) plus

100%.

The load bearing surface has an angular difference from level by no more than 2 degrees.

The load bearing surface is textured and firm enough to be considered a non-slip, hard
surface.

The load bearing surface will fully support lateral forces in all directions in excess of 100kg.
PPS 

T•FOLD

 dimensions provided below.

FIGURE 3-6 T-FOLD  WIDTH 

NOTE

 

Summary of Contents for T-FOLD













































Reviews: