PTM T-FOLD, User Manual

Page: 14 / 44

T•FOLD User Guide
Page 13
1.4 Machine Handling Safety Instructions
General safety instructions that must be observed when installing or moving the equipment are
explained below.
Do not locate this product where people might step on or trip over the power cord.
Friction or excessive pressure may generate heat and eventually cause electric shock or a
fire accident
Do not place the T•FOLD in the following areas. Doing so may result in the T•FOLD tipping
or falling over and causing serious injury.
Unstable or loose surfaces
Angled surfaces
Areas subject to vibration by other equipment
Do not stand on or place heavy objects on your T•FOLD . Doing so may result in the T•FOLD
tipping or falling over and causing injury.
Do not cover the ventilation holes of this product with cloth, such as a blanket or table
cloth whilst the
T•FOLD is switched on. Doing so could obstruct ventilation and cause fire.
This product weighs 50Kg. This product should always be lifted / carried / moved by a team of
two or more persons to avoid mishandling or injury
Ensure all packing materials are removed from the product before lifting from it’s crate. If the
product is lifted with materials attached, it may slip from the hands and be damaged.
Ensure that the T•FOLD is always kept in a horizontal position, even whilst it is being lifted or
moved.
When lifting this product, do so at the main body of the product with two people – lift points are
indicated by arrows below.
WARNING
FIGURE 1-1 T•FOLD LIFT POINTS