PTI security systems Falcon XT, Installation Manual

Page: 56 / 64

52
a
ppENdIx
Site Closeout Checklist (cont’d)
Door Alarm System:
□ Open and close every alarmed door on-site in sequential order. THIS STEP IS
VERY IMPORTANT and can be performed ahead of time and proven by the next
step below.
□ Print a ‘Site Activity by Date’ for today’s date showing each door opening and
closing in sequential order with no mistakes. This cannot be faked in the system
and will demonstrate that all doors are correctly working. Attach a current copy of
this report.
□ Verify that when a door is opened without entering a code, the siren sounds for the
correct time.
□ Verify that when a door is opened without entering a code, the siren is stopped and
every door returns to alarmed normal status when alarms are cleared in the control
software.
Intercom System:
□ Verify that each keypad call button works to call the intercom base station.
□ Verify that each keypad can receive a call from the intercom base station.
□ Verify that the volume is sufficient at each keypad and base station.
□ Verify that any other remote intercom call stations send and receive calls.
□ Verify each remote intercom call station location is correctly labeled at the intercom
base station.
□ Verify that there isn’t any static, buzzing, or sound bleed at each keypad and
intercom station.
□ Verify that all call functions work throughout the site.
□ Verify that music can be heard at each location (NEM only).
□ Verify that radio is receiving stations (NEM only).
Site Graphics:
□ Verify every door correctly shows open and closed on the graphics (verify with door
test above).
□ Verify all screen control functions work through the mouse, control panel, or
wireless remote.
□ Verify the panning path and screen resolution allow the entire site to be viewed
while running.
□ Verify that Graphics update correctly.
□ Verify that the site graphics and layout are correct.
Initials: _____ _____