PTI security systems Falcon XT, Installation Manual

Page: 50 / 64

46
a
ppENdIx
Notices, Disclaimers, and Warnings
We strongly recommend that installation and setup of PTI Security Systems equipment
be done by a certified, licensed, qualified, and competent person. PTI Security Systems
can recommend local dealers and installers, but it is up to the customer to verify their
qualifications and negotiate any pricing or contracts unless PTI Security Systems has
been specifically contracted in writing to do so for the customer. With any computer setup
or installation, some troubleshooting and adjustment of the configuration may be required.
This will differ with every installation and computer setup depending on operating system,
software installed, quality of components, internet connection, modem connection, and
any site-specific variables. Troubleshooting and configuration may require purchasing
additional equipment. Under no circumstances will PTI Security Systems be responsible
for any damages either incidental or consequential based on these recommendations.
All installation of electronics and electrical systems must be in compliance with local,
municipal, and state codes, and the National Electrical Code.
Installation of equipment manufactured by PTI Security Systems must be performed per
our recommendations and guidelines except where local, municipal, state, and provincial
codes, and the National Electrical Code and Construction codes take precedence. When
code and our guidelines do not cover a given situation, it is the responsibility of the Dealer/
Installer to contact PTI Security Systems for instruction and/or follow established custom
and best practices applicable to the particular trade. Dealers and Installers must know and
abide by all existing laws pertaining to their work.
The User should follow all installation, operation, and maintenance instructions. The
User is strongly advised to conduct Product and systems tests at least once each week.
Changes in environmental conditions, electric or electronic disruptions, and tampering
may cause the Product to not perform as expected.
Reliable equipment operation is dependent upon noise-free uninterrupted sources of
power. The battery backup feature is provided primarily to preserve the integrity of the
memory database and operation of the system. This will not guarantee operation of the
gate motor or door actuator for emergency situations in the event of a power loss or
equipment failure. It is the sole responsibility of the purchaser to provide for and facilitate
manual nonelectrical emergency means of exit in the event of a power failure. Contact
your local dealer/installer for options and availability.