PT CPC5565, User Manual, Page: 31 / 118

Software
31
Hot Swap
• Blue = safe to extract board
• Off = not safe to extract board
• Short Blink = payload is shutting down
Status/Health
• Off = payload not powered
• Green = healthy (amber conditions not met)
• Amber = at least one threshold sensor has crossed a critical threshold, the payload is held in reset,
power is not good (as detected by HW), the processor is reporting CPU Error, the processor is
reporting Therm Trip, or the processor is in ACPI sleep state 5.
Rear-Panel I/O
The CPC5565 transitions the following I/O signals through CompactPCI connector J5 to an
optional Rear Transition Module:
• COM port
• Video
• Power and Ground
• USB
• SATA
• SMBus
• RPIO Present
• Eject
• JTAG
In addition, the CPC5565 transitions Gigabit Ethernet A and B through CompactPCI connector
J3.
See Chapter 5, “Connectors,” on page 79 for more information on the connectors present on
the CPC5565.
Software
BIOS
The PT Embedded BIOS (AMI core) is user-configurable to boot an operating system from one
of the following locations:
• USB mass storage device (hard drive, DVD-ROM or CD-ROM drive, flash drive, etc.)
• Serial ATA (SATA) hard drives
• Ethernet (PXE)
• Any add-on cards/boards that support a BIOS boot specification option ROM