ADG400 User Manual
Michell Instruments
9
OPERATION
3.6.1.1 Set Point Picker
This is used to change the set point in Manual mode.
Item
Description
Arrow Buttons < >
Change the desired set point.
Standard Table /
User Table Button
Select a new set point from the displayed table. This is only
visible if the user-defined set points have been created.
Apply
Apply the selected set point and return to the Main screen.
Back
Return to the Main screen without changing the set point.
Figure 5
Set Point Picker Screen
3.6.2
Profile Mode
Profile mode runs one of three profiles which contain a list of set points, each with an
associated duration. This allows unattended operation.
Figure 6
Main Screen in Profile Mode
To enter Profile mode, the
Mode
button is pressed from the Main screen. This takes you
to the Profile select screen, which allows one of the three profile presets to be loaded.
