ADG400 User Manual
8
99998 Issue 1, November 2022
OPERATION
3.6
Modes of Operation
The modes of operations are:
•
Manual mode:
change set points by button press
•
Profile mode:
set points change automatically after a predetermined time
•
Remote mode:
set points are changed by serial command from a PC (for
software integration)
•
Remote Access:
the ADG is controlled from a PC using the HMI
When in Manual mode, the mode can be changed by pressing the
Mode
button.
When in Profile or Remote mode, the
Stop
button must be pressed to return to Manual
mode. The
Stop
button will be replaced with an
Unlock
button if passcode protection
is enabled.
3.6.1 Manual Mode
Pressing the
Set Point
button takes you to the set-point picker, enabling a new set point
to be selected.
Figure 4
Main Screen in Manual Mode
