00041652.DOC, Version 1.2
34/51
4.4 Inserts
Inserts can be used for dynamic processors, equalizers or other sound effectors modifying the original signal
completely.
The signal is separated, led outside and inserted at the same position after being modified.
Please note:
If you do not return the signal into the insert point, there will be no signal output as the signal
flow is completely interrupted. If you only wish to exit the signal, you must only push the jack plug into the
first contact.
The inserts are pre EQ, AUX and fader and are sent and received via the same jack plug.
Occupation Insert connections:
Insert-connection via
Tip
Sleeve
Strain relief clamp
stereo 1/4" jack plug
Ring
Tip =
Output
Sleeve =
Ground / Shield
Ring =
Input
Effector-
input
Effector-
output
Tip =
Output
Sleeve =
Ground / Shield
Ring =
Input
Mixer output
stereo 1/4" jack plug
Connect the mixer‘s output signal via an Insert-cable/adapter with the effector’s input (tip & sleeve) and
output (ring & sleeve).
4.5 Direct Outs
Direct outs can be used for direct connection of the MIC channels. They are necessary if you want to make
multi-track recordings during a concert. Every signal source can be recorded on a single track.
Occupation Direct Outs:
Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
Balanced use of
Tip =
hot (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
stereo 1/4" jack plugs
Ring =
cold (-)
Ring
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
