00041652.DOC, Version 1.2
36/51
0
0
+15
-15
0
+15
-15
2K
8K
400
0
+15
-15
500
2K
100
0
+15
-15
25
GAIN
0
60
MIC
-20
-40
LINE
80Hz
12KHz
TREBLE
HI
MID
FREQ
Hz
LO
MID
FREQ
Hz
BASS
80Hz
EQ
ON
OFF
+48V
5 DESCRIPTION OF THE DEVICE
5.1 Channel module
+48V-LED
Illuminated with activate phantom power. The +48V switch is located on the rear panel.
GAIN
With the GAIN control, you can set the level of the input signal. The control range is
between 0 and 60 dB for the microphone signals and -20 to +40 dB for the line signals.
Please refer to Adjusting the input level.
LOW CUT
With the Low Cut switch, you can activate the highpass filter. This filter reduces low-
frequency noise like microphone punch, closetalk, stage noise etc. with 80 Hz and a slope of
12 dB/octave. The bass filter works independently from the equalizer settings.
TREBLE
With the TREBLE control, you can increase or lower the treble of the input signal at the
respective channel. This is a 12 kHz shelving equalizer with a control range of ±15 dB.
HI MID
With the HI MID control, you can increase or lower the Hi mids of the input signal at the
respective channel. The HI MID equalizer a bell equalizer with a control range of ±15 dB.
HI MID FREQ
With the HI MID FREQ control, you can adjust the HI MID control frequency between 400
Hz and 8 kHz.
LO MID
With the LO MID control, you can increase or lower the Low mids of the input signal at the
respective channel. The LO MID equalizer a bell equalizer with a control range of ±15 dB.
LO MID FREQ
With the LO MID FREQ control, you can adjust the LO MID control frequency between 100
Hz and 2 kHz.
BASS
With the BASS control, you can increase or lower the bass of the input signal at the
respective channel. This is an 80 Hz shelving equalizer with a control range of ±15 dB.
EQ
With the EQ switch, you can bypass the equalizer.
