PSS GARED 6740 Installation, Operation And Maintenance Instructions Download Page 2

 

  

6740 Badminton System

   

 

 

Table of Contents 

Section 

Page No. 

Introduction 

Specifications 

Assembly and Setup 

Unit Operation 

 

Maintenance 

 

Introduction

 

Thank you for your purchase of a model 6740.  To ensure that our equipment will provide years 
of use to you, we are including this installation, operation, and maintenance guide.  This guide 
will provide information on the proper assembly and installation methods, operating procedures, 
and preventative maintenance of your badminton system. 
 
Please do not substitute for factory parts.  Contact the Gared or PSS customer service department 
and allow them to determine if substitute parts are acceptable. 
 
It is recommended that an individual who has been properly trained perform assembly and set up 
of the badminton.  No one under the age of 18 should attempt assembly or set up of the unit, 
unless properly supervised. 
 
To prevent normal wear and tear from shortening the life of the unit, preventative maintenance 
inspections and repairs should be performed at least once per year.  If the units are subject to 
high or unusual usage, inspections should be scheduled to occur more frequently.  If items are 
found to be nonconforming, replacements can be ordered from Gared, PSS or one of our 
authorized dealers.  When contacting Gared or PSS, please have information regarding the 
dealer/installer who sold the unit, the name of the project, and any applicable warranty 
information. 
 

 
 

Summary of Contents for GARED 6740









Reviews: