BoardWalk Ramp and Platform Assembly Instructions
9
Identify the orientation of the
hinge
(#B) as the knuckle of the hinge
should face away from the top side of the
approach plate
(#A).
Put the
truss head bolt (1/4” – 20 x 3/4”)
(#C) through the
hinge
(#B) and
approach plate
(#A). Put the
washer
(#D) and
nut
(#E)
onto the truss head bolt and tighten. Repeat for the three other
bolts for that hinge.
Align the short side of the
hinge
(#B) (leaf with four holes) onto the
approach plate’s
(#A) corresponding holes.
Repeat step two and three for remaining two hinges.
STEP 2
STEP 4
STEP 3
STEP 5
APPROACH PLATE ASSEMBLY
3.
A.
B.
D.
E.
C.
B.
C.
Knuckle
Leaf with four holes
Leaf with five holes
