8
Cable Reel replacement Instructions (ACT)
The replacement reel has a coil of excess wire and a clamp on it (Fig 1). Pull the cable out through
the roller-guides to the boom tip. Measure how much of the excess wire you need to re-connect
the wires to the junction box for the A-2-B switch and cut off the excess wire.
Attach the cable clamp and rubber grommet you removed (Fig 2) and connect the wires to the junction box.
Remove the clamp back and rubber grommet at the cable reel.
When completed you should have tension on the cable from the reel (Fig 3) in order for the reel to wind up
properly, if not readjust the cable clamp to tension it more.
Fig 1.
Fig 2
Fig 3
