PS
M
ailers
™
PSM10K
800.464.5030 • psmailers.com
20
Troubleshooting
Automatically Clearing a Paper Jam
If paper becomes jammed in the machine:
1. Remove all paper from the
Feed Table.
2. If the
Breaker Power Switch
has tripped
(light is off)
, flip to
the ON (lit) position.
3. Remove the
Lower Fold Plate.
4. Press the
Reverse
button.
5. The paper should exit from the back
(where the lower fold
plate normally sits).
If it doesn’t, try pressing the
Reverse
button again. If the paper is not moving or you cannot see it,
then you need to manually clear the jam
(see next section).
6. Replace the Lower Fold Plate.
Manually Clearing a Paper Jam
1. Disconnect the power cord from the machine.
Make sure that the power cord has been disconnected
before continuing!
2. Remove all paper from the
Feed Table.
3. Remove the
Lower Fold Plate
from the machine.
4. Remove the access panel in the side cover.
5. Place the
Breaker Bar
socket
(inside the tool box)
over the
hex end of the #3 roller
(Figure 10, page 13).
6. Rotate the breaker bar clockwise until the jammed form is
out of the machine.
7. Replace the lower fold plate.
8. Replace the paper on the feed table.
9. Return the breaker bar to the tool kit.
10. Replace the side cover access panel.
11. Make sure that the
power switch
is in the
OFF
position.
12. Connect the power cord to the machine.
Summary of Contents for PSM10K
Page 1: ...PSMailers PSM10K Operating Manual...
Page 2: ......
