Psion Teklogix Vehicle-Mount Computer 8255, User Manual, Page: 298 / 348

Appendix D:Radio Parameters
Channel
D-14
Teklogix 7035, 8255 & 8260 Terminals User Manual
Radio Address
Important: “Radio Address” only takes effect when “Cellular” is
enabled (set to “Y”).
The value entered in the “Radio address” parameter is used to identify the
terminal over the radio link. A unique value from 1 to 3840 must be assigned
for each terminal.
D.3.2 Channel
Channel #
This parameter determines the operating radio channel of the terminal. The channel
selected must be an enabled channel. Refer to “Channel Enable” on page D-15 on
for details about enabling channels.
Power-Up Chan
If this parameter is enabled (set to “Y”), the terminal will start communicating on
the channel specified in the “Channel #” parameter when the terminal is powered
up. This setting may prevent the migration of terminals to the same channel due to
uneven coverage in some sites. If this parameter is disabled (set to “N”), the terminal
will continue communicating on the same channel that it was on before it was
turned off.
Channel # 1 1-20
Power-up chan Y Y/N
Channel Enable » see text
Switch speed Slow Fast/Slow
Manual table N» see text
Channel
Range