Psion Teklogix Vehicle-Mount Computer 8255, User Manual, Page: 292 / 348

Appendix D:Radio Parameters
TRX7441 802.11b DS SS Radio Parameters
D-8
Teklogix 7035, 8255 & 8260 Terminals User Manual
D.2 TRX7441 802.11b DS SS Radio Parameters
Important: Changes to these parameters will not take effect until the terminal
is reset by pressing and holding down the <BLUE> key and the
<ENTER/ON> key for a minimum of six seconds.
ESSID
The ESSID (Extended Service Set Identifier) is a string of characters, to a maximum
of 32, that the terminal uses to determine with which access points it can communi-
cate. The terminal will only communicate with access points configured with the
same ESSID. If a value is not assigned for this parameter or if “ANY” is entered, the
terminal will communicate with any available access point.
Station
The value entered in this parameter, to a maximum of 32 characters, is used to
identify the terminal (an 802.11 station) for diagnostic purposes.
Data Rate
The value entered in this parameter specifies the data rate to be used for message
transmission. The data rate can be set to one of the following: Auto, 1Mbit, 2Mbit,
5.5Mbit or 11Mbit.
ESSID rfc see text
Station see text
Data Rate Auto see text
Pwr Saving Y» see text
Network Infra Infra, Adhoc
Channel 10 1-14
Mixed Cells N Y/N
Auth Type None Open, Shared
WEP Encrypt N» see text
LEAP N» see text
CIS Data » see text
Range
802.11 DS SS