PSG MAX CADDY PF01102, Installation And Operating Instructions Manual

Page: 29 / 79

29
9.14. ELECTRICAL ELEMENT INSTALLATION (OPTIONAL)
9.14.1. INTRODUCTION
Two electrical elements are available for the Max Caddy: and 20Kw et 25kW. These options include all components
necessary for the installation. Instructions for installing the electrical elements are provided with the electrical element.
WARNING: USE WIRING SUITABLE FOR 75 °C (NOT INCLUDED).
9.14.2. CONNECTING THE ELECTRICAL ELEMENT
MODEL
THEORETICAL
OUTPUT
TEMP. VAR.
(
O
F)
BTU/HR
AMPS
TOTAL
BREAKER
REQUIRED
FEEDER
GAUGE
VOLTAGE
SINGLE PHASE
ELEMENTS
QTY
20 kW 2,100 75 68,240 85 125 amps 3 120/240 4 x 5 kW
25 kW 2,100 85 85,325 100 150 amps 2 120/240 5 x 5 kW
WOOD 2,100 100 180,000 5 15 amps 14 120 N/A
Electrical connections must conform to the wiring diagram supplied with the option.
The electrical element must be connected to the power board (See Section 17 - ELECTRICAL DIAGRAM FOR
ELECTRIC UNIT). For security reasons, the electrical element has a manual reset thermostatic sensor that is located
inside the electrical unit. If the temperature of the electric unit exceeds the high limit, the thermostatic sensor will
disengage the elements. After finding and fixing the problem that has caused the unit to overheat (static pressure too
high, fan breakdown, etc.), reactivate by pressing the red “manual reset” button on the thermostatic sensor (L-170
thermodisc).
INSIDE VIEW OF ELECTRIC ELEMENT
L-170 Thermodisc RESET
Red button manual reset