5
WILDEN PUMP & ENGINEERING, LLC
Height ..................................128 mm (5.0")
Width ....................................155 mm (6.1")
Depth ....................................124 mm (4.9")
Ship Weight: Conductive
Polyethylene ..........2 kg (4 lbs)
Air Inlet ......................6 mm (
₁⁄₄
") FNPT/BSP
Inlet..........................13 mm (
₁⁄₂
") FNPT/BSP
Discharge ................13 mm (
₁⁄₂
") FNPT/BSP
Suction Lift ........................2.0 m (6.6') Dry
1
8.0 m (26.2') Wet
1
Max. dry suction is achieved when pump is fitted
with cylinder check valves.
Sound: Max. dBA .................................... 83
Displacement Per Stroke.... 0.026 l (0.007 gal)
1
Maximum Viscosity ........................6,000 cP
Max. Flow Rate ..............20.0 lpm (5.3 gpm)
Max. Size Solids ..................2.0 mm (0.08")
1
Displacement per stroke was calculated at 6.9 bar
(100 psig) air inlet pressure against 0 bar (0 psig)
head pressure.
Example:
To pump 7.6 lpm (2.0 gpm) against
a discharge pressure head of 2.5 bar (36 psig)
requires 4.1 bar (60 psig) and 1.7 Nm
3
/h
(1.0 scfm) air consumption. (See dot on chart.)
Caution: Do not exceed 7 bar (100 psig)
air inlet supply pressure.
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily operation parameters
will fall in the center of the pump performance curve.
SECTION 5A
PERFORMANCE CURVES
UX.038 CONDUCTIVE PLASTIC
RUBBER/TEFLON
®
-FITTED
Height ....................................96 mm (3.8")
Width ....................................137 mm (5.4")
Depth ......................................86 mm (3.2")
Ship Weight : Conductive
Polyethylene ..........1 kg (2 lbs)
Air Inlet ......................6 mm (
₁⁄₄
") FNPT/BSP
Inlet..........................10 mm (
₃⁄₈
") FNPT/BSP
Discharge ................10 mm (
₃⁄₈
") FNPT/BSP
Suction Lift ........................1.5 m (4.9') Dry
1
8.0 m (26.2') Wet
1
Max. dry suction is achieved when pump is fitted
with cylinder check valves.
Sound: Max. dBA .................................... 83
Displacement Per Stroke.... 0.008 l (0.002 gal)
1
Maximum Viscosity ........................3,000 cP
Max. Flow Rate ..............10.0 lpm (2.6 gpm)
Max. Size Solids ..................1.5 mm (0.06")
1
Displacement per stroke was calculated at 6.9 bar
(100 psig) air inlet pressure against 0 bar (0 psig)
head pressure.
Example:
To pump 5.7 lpm (1.5 gpm) against
a discharge pressure head of 2.3 bar (33 psig)
requires 5.5 bar (80 psig) and 5.1 Nm
3
/h
(3.0 scfm) air consumption. (See dot on chart.)
Caution: Do not exceed 7 bar (100 psig)
air inlet supply pressure.
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily operation parameters
will fall in the center of the pump performance curve.
SECTION 5B
PERFORMANCE CURVES
UX.050 CONDUCTIVE PLASTIC
RUBBER/TEFLON
®
-FITTED
