SPECIFICATION OF PV CHARGE CONTROLLER
9
4.3.3
In the main screen, press confirm key to control the DC
output or not.
4.4
Instruction of setting parameter
Any parameters in the next menus can be adjusted by users
according to different requirement of battery, and all adjustment
need password to confirm the change. The factory password is
1234.
4.4.1
Device Set
In the submenu 1 interface, when the cursor in the “2.
Device Set” position, press confirm key to the
following interface
Users can set the Equipment ID, Date and Real time
4.4.2
Parameter Set
In the submenu 1 interface, when the cursor in the “3.
Parameter Set” position, press the confirm key to the
following interface
➢
OV.Disc: Over charge, if battery real voltage high
than this value, the controller will stop charging.
➢
Ov_Rect: Over charge reconnect, when battery real
