PSC QuickScan 3000, Product Reference Manual

Page: 247 / 352

13-21
Advanced Data Formatting
Specific String, Any Location
Scan this bar code, then, using the Numeric Keypad on page 13-22, scan a two-digit
number representing the position (use a leading “zero” if necessary). Then scan the
desired character or characters (up to a total of 8) on the Alphanumeric Keyboard on page
13-80, followed by the
End Of Message bar code on page 13-86.
After scanning the following bar code:
1. Enter a location using the Numeric Keypad on page 13-22.
2. Enter a string using the Alphanumeric Keyboard beginning on page 13-80.
3. Scan End Of Message on page 13-86.
Note: Scan the Cancel bar code on page 13-22 to abort the first numeric
value scanned. When the Cancel bar code is scanned, an error beep
sounds and you must re-scan the full two-digit number representing
the position. If you already scanned a two-digit position and wish to
cancel your entry, the entire rule entry must be cancelled by
scanning Quit Entering Rules on page 13-10.
Any Message OK
By not scanning any bar code, all selected code types are formatted, regardless of
information contained.
Specific String Any Location