PSC LINEAR IMAGER 7000, Product Reference Manual

Page: 78 / 212

Data Editing
4-2 PowerScan
®
7000 Linear Imager
Please Keep In Mind...
• Modifying a message string is not a mandatory requirement. Data
editing is sophisticated feature allowing highly customizable out-
put for advanced users. Factory default settings for data editing is
typically set to NONE.
• A prefix or suffix may be applied (reference the
Symbologies
chap-
ter for these settings) across all symbologies (set via the Global fea-
tures in this chapter).
• You can add any character from the
ASCII Chart
(from 00-FF) on
the inside back cover of this manual as a prefix, suffix or Label ID.
• Enter prefixes and suffixes in the order in which you want them to
appear on the output.
Global Prefix/Suffix
Up to 20 ASCII characters may be added as a prefix (in a position before
the bar code data) and/or as a suffix (in a position following the bar code
data) as indicated in
Figure 4-2
.
Figure 4-2. Prefix and Suffix Positions
Prefix Suffix AIM ID Label ID Label ID Bar Code Data
00 - 20 Characters (ASCII)
AND
OR
OR...