background image

inches from all walls, but the choice is yours to determine by 
listening.

2.  You in Relation to the Speakers

Where you sit in relation to your speakers obviously makes a 
difference too.  The proportions of the particular triangle formed by 
your speakers and you matter.  (You may need to send more power to 
the more distant speaker to compensate if you get much further from 
one speaker than the other.)  The overall distances involved also 
matter.  As you get further from the speakers, more sound reflected 
from your room’s surfaces (in contrast to the sound coming directly 
from the speakers) reaches your ears, and the original spatial 
relationships in a recording are changed as your room “takes over.”  
Sometimes the result is a mellower, more “integrated” sound.  Other 
times, it’s a more strident or annoyingly “echoey”—or other—quality.  
Once again, the particular dimensions of your room play a part.  And 
depending on what seems more realistic and/or enjoyable to your 
ears, you may choose to sit at a great distance or have close-up, 
“near-field” sound. Keep in mind that the right  “toe-in,” the right 
speaker height, and a reasonably symmetrical distance from the 
speakers all tend to work together to deliver the best high-frequency 
definition and imaging.

3.  You in Relation to Room Boundaries

Changing your own position with respect to a room’s boundaries may 
also bring a big effect, sometimes for a small change.  Getting further 
from the wall behind you may make sound more precise and 
localized.  Getting closer may make sound more “mellow” and 
integrated.  Coming too close—to back wall, side wall, or (especially) 
a corner— you may experience a major peak or cancellation of a 
certain band of frequencies.   It depends on factors we can’t cover 
fully here but do get into on our web site.

Remember too, with respect to your own positioning, that it may—or 
may not—be easier to change your own seating location than to 
move your speakers.  As with so much else in life, the one certain rule 
is that you shouldn’t fix, or worry about, what isn’t broken (audibly in 
this case), especially if it means moving heavy furniture.

As you consider the three relationships we have outlined, the idea is 
to manipulate whatever variable is easiest and most productive for 
improving your listening experience. Be sure to base your judgements 
on listening to a good variety of recordings of vocals, and acoustic 
instruments, soloists, different movies and musical instruments to 
most easily recognize tonal balance shifts.

10

O

w

n

e

r’

s

 M

a

n

u

a

l

Summary of Contents for 6919217




























Reviews: