PS Engineering
PMA8000BT Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-890-0702
Page 3-11
Rev. 1, Oct. 2010
You can answer a call by pushing the TEL button while it is ringing. Calls can be answered from the tel e-
phone handset or the audio panel. You can disconnect from either the handset or the audio panel. When a
call is disconnected or dropped, the TEL button indicator will extinguish after a few moments.
3.12.1 Pairing and unpairing Bluetooth devices
The PMA8000BT can be paired with up to eight individual devices. When that nu mber is exceeded, one
device will be automatically un -paired to allow the new device. The device eliminate will be selected at
random by the Bluetooth module.
Hint, if your old phone is not recognized by the PMA8000BT, you may
simply need to re-pair.
3.12.1.1
Paring separate music and telephone devices
It is possible to use a different music source (iPad, iPod with Bluetooth adapter, Bluetooth enabled laptop,
etc) and telephone. However, the music source must be paired
first
,
before
the telephone, if the telephone
also has music streaming capability. Otherwise, the Smartphone will also take over the music streaming.
The PMA8000BT must be in SuperBlue™ mode to accept additional source. To change the Bluetooth
pairing scheme, hold the combinations of buttons shown in the following table,
Mode
Hold buttons at power-on
SimpleBlue™
Nav 1 and Nav 2 (default)
SuperBlue™
Nav 1 & MKR
3.12.1.2
Changing access codes
If desired, you can change the 4-digit code needed to pair your device. Hold the button shown in the fol-
lowing table, and turn the PMA8000BT on. You will hear a tone indicating that the code was changed.
Hold button on power up
Pairing Code
Nav 1
0000 (default)
Nav 2
1234
MKR
1111
3.12.2 Last Number Redial
The audio panel will redial the last number dialed from the paire d telephone. When there is no call in
progress, press the TEL button and then press and hold the MKR button for 1 second, or until the tele-
phone connects and redials.
3.12.3 Speed Dial
NOTE: this feature ONLY works if the paired cell phone has Speed Dial numbers stored. To access the
speed dial keys
stored in your telephone
, when there is no call in progress, press the TEL button and then
press and hold the Nav 1 button (Speed dial #1) or the Nav 2 button (speed dial #2) for one second, or
until the phone activates,
