®
4826 Sterling Drive, Boulder, CO 80301 . PH: 1 (800) PSAUDIO . www.psaudio.com
15-067-21-1
Rev A
©
2018 PS Audio Inc. All rights reserved.
Owner’s Reference
Sprout100
Sprout100’s power amplifier provides enough wattage
to power just about any loudspeaker pair. However, we
recommend only one pair of loudspeakers be connected
at a time.
Connect red (+) of the right speaker to Sprout100’s red
(+) right speaker output. Connect the black (-) of the right
speaker to Sprout100’s (-) right speaker output directly
below it. Follow the same convention for the left.
NOTE* The amplifier is a balanced output design. If you
were to attempt to ground the black output, the unit will
possibly go into protection as soon as music is played.
Protection mode is indicated by a Red LED on the front
panel.
NOTE* The amplifier has a DC voltage that is present
between all of the speaker output jacks and the chassis.
DO NOT attempt to connect or disconnect speakers while
the power cable is plugged in. Doing so could damage
your speakers
Sprout100’s headphone jack is a standard 1/4” stereo
output. We’ve included a 3.5mm to ¼” jack headphone
adapter if you are using a pair of headphones that has the
3.5mm tip.
NOTE* If Headphones are plugged into Sprout100’s
headphone jack the audio signal to the speaker output
and subwoofer output will automatically disable.
Speaker
Connections
15
Headphones
Operating Guide
Summary of Contents for Sprout100
Page 28: ......
