®
4826 Sterling Drive, Boulder, CO 80301 . PH: 1 (800) PSAUDIO . www.psaudio.com
15-067-21-1
Rev A
©
2018 PS Audio Inc. All rights reserved.
Owner’s Reference
Sprout100
If you have a CD player, transport, gaming device, or any
digital audio device with a TOSLINK digital output, use a
standard fiber optic cable to connect the digital output of
your device to Sprout100’s TOSLINK input as shown in the
back panel diagram. Then select the Digital input on the
front panel.
NOTE* If you have a USB cable connected to the USB input
this will disable the TOSLINK input.
Sprout100 is equipped with a class 2.0 Bluetooth
transceiver. You will need to select the Bluetooth input
on the input selector to enable this input. Sprout100’s
Bluetooth transmitter will broadcast its ID automatically.
You only need to enable Bluetooth on your device and
select Sprout100 from the available devices.
To use Sprout100 for vinyl, the vinyl input must be
connected only to a turntable. The vinyl input on
Sprout100 was optimized for 5-6mV moving magnet
cartridges and was designed to support moving magnet
cartridges ranging from 3-10mV.
Plug the left and right cables from your turntable into
Sprout100’s input labeled Vinyl. The red vinyl input is right,
the white is left.
NOTE* It is recommended to connect the ground lug to
your turntable if a ground connection is available.
13
TOSLINK Input
Bluetooth
Input
Vinyl Input
Operating Guide
Summary of Contents for Sprout100
Page 28: ......
