PRV Audio DSP 2.8X, User Manual

Page: 8 / 11

14 15
• Sequencer
This feature allows you to activate several products sequentially.
The sequencer has three outputs
(S1, S2 and S3)
that are activated and deactivated
sequentially according to the input signal of the remote input (REM IN).
The activation interval between each output
can be configured from 0s to 4s.
When the configured time is 0s, the three
outputs will be enabled and disabled at the
same time, after 3s of the absence of the
remote signal at the input (REM IN).
To connect the remote signals, use cables of
at least
20 AWG
.
It is possible to turn ON/OFF each
sequencer output independently.
When the output is turned off, it will not
trigger when the processor is turned on
again.
MAIN MENU
Sequencer
SEQUENCER
ON/OFF
SEQUENCER
S1: ON
SEQUENCER
Time
SEQUENCER
Time : 2.0 s
AMPLIFIER 1
AMPLIFIER 2
AMPLIFIER 3
Rádio / Player
Battery
STETSOM
Example of installing the "SEQUENCER" feature:
Technical specifications
Number of Channels:
Graphic Equalizer:
Graphic Equalization Presets:
Parametric Equalizer:
Crossover with Variable Frequency:
Crossover Presets:
Routing between Inputs and Outputs:
Alignment:
Phase Inversion:
Limiter:
Master Level and Gain:
Memory Positions Save/Load:
Safety:
Frequency Generator:
Frequency Sweep:
Pink Noise Generator:
Screensaver:
Languages:
Latency:
Input Impedance:
Output Impedance:
Max. Input and Output Voltage:
Max. Output current (
SEQUENCER
):
Saturation Indicator:
Signal-to-noise ratio:
Total Harmonic Distortion (T.H.D):
Channel Separation:
Frequency Response:
Power supply:
Max. Current Consumption:
Dimensions (W x H x D):
Weight:
Input:
2 /
Output:
8
15 Bands
(gain ±12dB)
12
1 Input + 1 per Output (gain ±12dB, Fator Q 0.4 ~ 10.0)
Butterworth: 12/18/24/36/48 dB/8ª
Linkwitz-Riley: 12/18/24/36/48 dB/8ª
11
A, B or A+B
0 ~ 8ms (275cm)
0° ~ 180°
Threshold: -24 ~ 0dB / Attack: 0.1 ~ 100.0ms and
Release: 1 ~ 1600ms (manual/automatic)
0 ~ 100% (Gain -45 ~ +15dB per output)
Au 4 slots
Password with 4 digits
10Hz ~ 22kHz, Level -60 ~ 0dB
Freq. initial and final 10Hz ~ 22kHz
(Level -60 ~ 0dB and Speed control)
10Hz ~ 22kHz and Level -60 ~ 0dB
Editable text with 15 characters
Portuguese, English and Spanish
1,08ms
10 kΩ
47 Ω
5,6 Vpp
(+8,2 dBu)
180 mA
per output
1 per input + 1 per outpu (linked to the Limiter )
>90dB
<0,01%
>80dB
10Hz ~ 22,5kHz @ -1dB
10V ~ 15V DC
450mA @ 12,6V DC
37 x 200 x 101 mm
460g