PRV Audio DSP 2.8X, User Manual

Page: 4 / 11

6 7
Settings map
Find the desired configuration from the illustration below with all configurations
and processor features:
Audio Processing
Graphic Equalizer
Presets
Crossover Presets
Save
Load
Copy Channel
Security
Tools
Screensaver
Language
Sequencer
Graphic Input Equalizer
Parametric Input Equalizer
Parametric Output Equalizer
Routing Audio
Crossover
Delay
Phase
Limiter
Gain
Mute
Lock/Unlock
Charge Password
Tone Generator
Frequency Sweep
Pink Noise
Time
ON/OFF
Main Menu
Processor features
GRAPHIC EQ
f: 63 Hz +2.6 dB
PARAMETRIC EQ
freq.: 214 Hz
PARAMETRIC EQ
gain: +3.2 dB
PARAMETRIC EQ
Q: 1.4
• Graphic Input Equalizer
The input graphic equalizer has 15 bands, allowing a variation of ± 12 dB per
band, with a pitch of 0.1 dB, with frequencies equally spaced in 2/3 octave, in
the range of 25 to 16 kHz in accordance with
ISO requirements . The graphic equalizer
acts on the two inputs simultaneously.
• Parametric Input/Output Equalizer
The parametric equalizer allows you to choose a gain / attenuation at a specific
frequency, as well as the bandwidth of that equalizer by means of the Q factor,
the smaller the Q the greater the width of that equalization band, affecting to a
greater extent the neighboring frequencies .
The
DSP2.8X
has 9 parametric equalizers distributed as follows, 1 for the inputs
and 8 for the outputs (1 for output).
• Input and Output Routing
The purpose of the routing option allows you select the audio source A, B or A
+ B (sum) for each output. Turning the
ENCODER
dial moves the audio source
to the selected route. To select another
channel, quickly press the corresponding
HOTKEY.
ROUTING
IN A+B ---> OUT1