2-22
VIBXPERT Balancing 11.2010
Entering the balancing radius and rotor mass later
You can enter the balancing radius and the rotor mass later in the
Tools menu to have the achieved balancing quality and the centrifu-
gal force calculated. In this way, these values will be available to you
if you start the balancing procedure without the machine setup.
Optionally, you can enter different balancing radii for the trial run
and the balancing runs. To do so, activate the 'Use different radii'
option.
Influence coefficient
After the test run, VIBXPERT calculates the influence coefficient that
is used to calculate the balancing weights.
If you wish to use the influence coefficient from a previous balancing
measurement, you have the following options:
1. Manual entry via the number editor:
• In the Tools menu, click on '
Value mm/s/g@angle°
'
• First enter the amplitude.
• Press the MENU button and click on 'OK'.
• Enter the angle.
2. Load the coefficient from the file:
• Click on the 'Load coefficient' value.
• Select the coefficient file.
3. Use the coefficient from the file:
• Open the balancing file.
• Navigate to the last balancing step (measurement or data screen).
Balancing: Options
Balancing radius and rotor mass
Influence coefficient
