manualshive.com logo in svg

PRÜFTECHNIK VIBXPERT Balancing, Operating Instructions Manual

Share
Download
PRÜFTECHNIK VIBXPERT Balancing Operating Instructions Manual Download Page 26

2-18

VIBXPERT Balancing 11.2010

Combining balancing weights

If several weights have already been placed on the rotor, they can be
combined into one single weight. VIBXPERT vectorially adds the
weights of the completed balancing runs and displays the resulting
weight and fixing angle in the 'Data' screen and the 'Data View'
screen.

• Press the MENU button in the Data View screen.

• Click on "Combine":

The newly calculated balancing weight appears in the list in the
line for the next balancing run. All combined runs are marked with
a sum symbol ('

Σ

').

• Then press the MENU button and click on "OK" to accept the

combination of the balancing weights.

• Before continuing with the next balancing run, remove the weights

that were already attached and attach the newly calculated
balancing weight to the rotor.

Balancing: Evaluation

Attached weights

Combined weight

Attached weights

Combined weights

The weights from runs '1' to '4' were
combined:
Run '5' is carried out with the newly
calculated weight .

'A': Result in plane A

'B': Result in plane B

Summary of Contents for VIBXPERT Balancing













































Reviews:

No comments

Brands by name

Popular brands

Load more brands