background image

ProxxonTools.com

- 11 -

NO 28 160

80 grit

5 pieces

NO 28 162

150 grit

5 pieces

NO 28 164

240 grit

5 pieces

9. Care and maintenance

Caution:
Before cleaning, adjusting, service or repair, dis-
connect the mains plug and turn switch in “Off”-
Position!

Caution:
If any part is missing or damaged, do not plug the
disc sander in until the missing or damaged part
is replaced, and assembly is complete. To avoid
electrical  shock,  use  only  identical  PROXXON-
replacement parts when servicing double insulat-
ed tools.

Any  attempt  to  repair  or  replace  electrical  parts
on this disc sander may create a hazard unless
repair  is  done  by  a  qualified  service  technician.
Repair  service  is  available  at  your  PROXXON
service center (You find the address at address at
the back of this manual)

To avoid fire or toxic reaction, never use gaso-
line, naphtha, acetone, lacquer thinner, or sim-

ilar  highly  volatile  solvents  to  clean  the  disc
sander.

Cleaning:
The  machine  is  largely  maintenance  free.  To
ensure  a  long  service  life,  however,  the
machine  should  be  cleaned  with  a  soft  cloth,
handbrush  or  paintbrush  after  each  time  it  is
used. A vacuum cleaner is also recommended
here. A vacuum cleaner should always be used
during work!

The outside of the housing can be cleaned with a
soft,  possibly  damp  cloth.  In  this  process,  mild
soap  or  another  suitable  cleaning  agent  can  be
used.  Solvents  or  cleaning  agents  containing
alcohol (e.g. petrol, cleaning alcohols etc.) should
be  avoided,  since  these  can  attack  the  plastic
cases.

10. Disposal

Please do not dispose of this machine in house-
hold refuse! The machine contains materials that
can be recycled. If you have any questions about
his, please contact your local recycling company
or other relevant communal facilities.

LIMITED WARRANTY OF PROXXON POWER TOOLS FOR HOME USE

Prox-Tech, Inc., (“Seller”) warrants to the original purchaser only, that all PROXXON consumer power tools will be free
from defects in material or workmanship for a period of two years from the date of purchase. Seller’s sole obligation
and your exclusive remedy under this limited warranty and, to the extent permitted by law, any warranty or condition
implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or work-
manship  and  which  have  not  been  misused,  carelessly  handled,  or  misrepaired  by  persons  other  than  Seller  or
Authorized Service Station. In the event of a failure of a product to conform to this written warranty, please refer to the
Service and Repair section on the back of this manual and take action accordingly. This Limited Warranty does not
apply to accessory items such as circular saw blades, drill bits, router bits, jigsaw blades, sanding belts, grinding
wheels and other related items. Damage to the product resulting from tampering, accident, abuse, negligence, unaut-
horized repairs or alterations, unapproved attachments or other causes unrelated to problems with material or work-
manship are not covered by this warranty. Any implied warranties shall be limited in duration to two years from date
of purchase. Some states in the U.S. and some Canadian provinces do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you. In no event shall seller be liable for any incidental or con-
sequential damages (including but not limited to liability for loss of profits) arising from the sale or use of this product.
Some states in the U.S. and some Canadian provinces do not allow the exclusion or limitation of incidental or conse-
quential damages; so the above limitation or exclusion may not apply to you. This limited warranty gives you specific
legal rights, and you may also have other rights, which vary from state to state in the U.S., province to province in
Canada and from country to country. This limited warranty applies only to PROXXON power tools sold within the
United  States  of  America,  Canada,  the  commonwealth  of  Puerto  Rico  and  Mexico.  For  warranty  coverage  within
other countries contact your local PROXXON Importer.

Summary of Contents for TG 125/E












Reviews: