Prior to proceeding with the following manual please notice this update:
Long
Short
0 degrees
15 degrees
(FLAT SQUARE)
This part will minimize
free rota on.
Long screw
holds rotation position with a
small amount of pressure.
Tighten until firm only.
Note:
Rota on Stop
Please see that part (
A
) will be included with and attach
to your device. Used instead of (
C
) below.
A.
C.
7/20 Rev 0
Long
Short
0 degrees
15 degrees
(FLAT SQUARE)
This part will minimize
free rota on.
Long screw
holds rotation position with a
small amount of pressure.
Tighten until firm only.
Note:
Rota on Stop
A.
C.
some angled screens and screens bezels.
7/20 Rev 0
Illustration of previous instructions
Screw will press
in these two areas.
Position in the
hole
Behind
the white
motion
sensor
lens. So the
tape contacts the
shell.
Bottom view
This part will act as your rear rotation stop.
i.
Made in the U.S.A
proximitysystems.com/uvclean
PRODUCT GUIDE
