Proximity
UVC-SM
SET-UP
REV F /2020
P3
( OPTION A. )
( OPTION B. )
A) Step 1:
Place the
stand
between
the UVC device and
the main bracket.
A�ach the monitor
bracket
. Between the
UVC device and
the main
bracket.
B) Step 1:
B) Step 3:
Install 2 supplied
screws un�l firm.
Install 2 supplied
screws un�l firm.
Long
Short
Long
Short
0 degrees
15 degrees
(FLAT SQUARE)
This part will minimize
free rota�on.
Long screw
holds rotation position with a
small amount of pressure.
Tighten until firm only.
Note:
Rota�on Stop
Step 2:
Op�on
for
thin
monitor:
Adhere the bracket into place
at the back of the panel
Two sided adhesive is preinstalled.
Remove the adhesive paper.
Aligning the rear of the tab
with the front face of the monitor
or device, press down on the metal
bracket over the adhesive loca�ons.
Plug In Power.
Step 4:
Plug In Power
Step 5:
(supplied adapter
or a USB 3.0.)
Power is on.
