ProxiMity UV-CLEAN Product Manual Download Page 5

Proximity 

UVC-SM

SAFETY & DISPOSAL

REV F /2020

P2

Ba�ery disposal is controlled by law and requires proper ac�on.

Recycling and Refuse collec�on can be handled by commercial waste contractors, municipali�es, 

or other local household waste programs.

Internal Clock Ba�ery

Locate centers near you: 

search.earth911.com

EPA   

www.epa.gov

Federal Universal Waste Rule

Resources

www.lamprecycle.org

batteryresponsibility.org/battery-recycling 

 

Do not a�empt to service this product. Contact customer service at Proximity Systems for guidance.

Do not subject the bulb to fingerprints, solvents or abrasion. 

Cleaning the bulb with a damp cloth or lens �ssue is advised when the unit is not plugged in and the

device is at room temperature only. 

 

Maintenance

SAFETY & DISPOSAL

Appropriate use of this product is expected and is the responsibility of the purchaser of this product.

This product uses UV-C light. Eyes and skin should be kept from exposure.

Eye inflamma�on and skin irrita�on can occur from prolonged exposure. For sensi�ve skin, burns may occur.

Do not touch the glass UV bulb surface. Fingerprints create a barrier and reduce UV ability.

Do not use this device on people, food, or pets. 

Keep out of Reach of Children. This product is not a toy.

Do not a�empt to disassemble this product. Nor is it serviceable. Warranty will be void.

This UV bulb contains mercury in very small amounts. Precau�ons should be used to prevent breakage. 

Mercury may cause injury if swallowed and is known to cause reproduc�ve harm.

Dispose of this product responsibly per regula�ons.

Do not expose this product to water, liquids or moisture. Electricity is present.

UV-C can discolor materials such as plas�c and fabric over a period of �me.

 

 Designed For

 1. Commercial, Indoor use only

 2. Al�tude up to 3050m

 3. Working temperature: 20 - 27 degrees C (68-80 deg F). Humidity 20-90% (non-condensing).

     Storage temperature: 15 - 55 degrees C (59-130 deg F). Humidity <85% (non-condensing).

Environmental Condi�ons for Opera�on

Breakage: All visible bulb components should be cau�onarily swept into a sealable bag, box or jar and taken

outdoors.

Cau�on:  The UV bulb contains a very small amount of mercury.

As suggested by the EPA, do not vacuum up broken glass unless it is the only remaining debris. The same

steps used to clean-up common CFL’s may be used for this UV bulb. 

As listed here: h�ps://www.epa.gov/cfl/cleaning-broken-cfl

 

  

Recycling may be an op�on in your area.  

www.lamprecycle.org/state-local-laws

When done, this prevents mercury from entering the environment and reuse of glass, and metal is possible.

Refuse collec�on can be handled by commercial waste contractors, municipali�es, or other local household

waste programs.

UV Bulb

Summary of Contents for UV-CLEAN











Reviews: