ProxiMity UV-Clean UVC-RF Product Manual Download Page 4

Proximity 

UVC-SA

SAFETY & DISPOSAL

REV G /2021

P2

Battery disposal is controlled by law and requires proper action.

Recycling and Refuse collection can be handled by commercial waste contractors, municipalities, 

or other local household waste programs.

Internal Clock Battery

Locate centers near you: 

search.earth911.com

EPA   

www.epa.gov

Federal Universal Waste Rule

Resources

www.lamprecycle.org

batteryresponsibility.org/battery-recycling 

 

Do not attempt to service this product. Contact customer service at Proximity Systems for guidance.

Do not subject the bulb to 

finger

prints, solvents or abrasion. 

Cleaning the bulb with a damp cloth or lens tissue is advised when the unit is not plugged in and the

device is at room temperature only. 

 

Maintenance

SAFETY & DISPOSAL

Appropriate use of this product is expected and is the responsibility of the purchaser of this product.

This product uses UV-C light. Eyes and skin should be kept from exposure.

Eye in

fl

ammation and skin irritation can occur from prolonged exposure. For sensitive skin, burns may occur.

Do not touch the glass UV bulb surface. 

Finger

prints create a barrier and reduce UV ability.

Do not use this device on people, food, or pets. 

Keep out of Reach of Children. This product is not a toy.

Do not attempt to disassemble this product. Nor is it serviceable. Warranty will be void.

This UV bulb contains mercury in very small amounts. Precautions should be used to prevent breakage. 

Mercury may cause injury if swallowed and is known to cause reproductive harm.

Dispose of this product responsibly per regulations.

Do not expose this product to water, liquids or moisture. Electricity is present.

UV-C can discolor materials such as plastic and fabric over a period of time.

 

 

Designed For

 1. Commercial, Indoor use only

 2. Altitude up to 3050m

 3. Working temperature: 20 - 27 degrees C (68-80 deg F). Humidity 20-90% (non-condensing).

     Storage temperature: 15 - 55 degrees C (59-130 deg F). Humidity <85% (non-condensing).

Environmental Conditions for Operation

Breakage: All visible bulb components should be 

cautiously

 swept into a sealable bag, box or jar and taken

outdoors.

Caution:  The UV bulb contains a very small amount of mercury.

As suggested by the EPA, do not vacuum up broken glass unless it is the only remaining debris. The same

steps used to clean-up common CFL’s may be used for this UV bulb. 

As listed here: https://www.epa.gov/c

fl

/cleaning-broken-c

fl

 

  

Recycling may be an option in your area.  

www.lamprecycle.org/state-local-laws

When done, this prevents mercury from entering the environment and reuse of glass, and metal is possible.

Refuse collection can be handled by commercial waste contractors, municipalities, or other local household

waste programs.

UV Bulb

Summary of Contents for UV-Clean UVC-RF










Reviews: