Configuration
QB.11-R Installation and Management
QoS (Quality of Service) Parameters (BSU only)
116
•
IP Mask or MAC Mask
: 255.255.255.255 (for IP Mask) or FF:FF:FF:FF:FF:FF (for MAC mask)
9. Click
Add
.
10. Return to the
QoS PIR
tab, and click
Add Table Entries
.
11. Now you will configure the Source Address PIR. Enter the
Rule Name:
Enter the
Rule Name:
Management Station SRC MAC Addr
if you are using a MAC addresses, or
Management
Station SRC IP Addr
if you are using a IP addresses.
12. Set the
Entry Status
to Enable.
13. Click
Add
. The SRC Management PIR will be added to the PIR list.
14. Click the
Details
button next to the SRC Management PIR you just created.
15. Scroll down to the
Source IP Table
or the
Source MAC Table
, depending on your configuration requirements,
and click
Add Table Entries
.
16. Enter the following information:
•
IP Address
or
MAC Address
: IP address or MAC Address of management station
•
IP Mask or MAC Mask
: 255.255.255.255 (for IP Mask) or FF:FF:FF:FF:FF:FF (for MAC mask)
17. Click
Add
.
Step 2: Add Service Flow Classes
To handle management traffic, the system needs two Service Flow Classes: one for uplink traffic, and one for downlink
traffic.
A. Configure the Downlink Service Flow
1. Click
Configure > QoS > QoS SF Class
.
2. Click
Add Table Entries
.
3. Enter the following parameters:
•
SF Name
: DL-Management
•
SF Schd Type
: RtPS
•
SF Direction
: Downlink
•
MIR
: 1000
•
CIR
: 1000
•
Latency
: 20
•
Jitter
: 10
•
Priority
: 7
•
Number of Frames Per Burst
: 4
•
SF Entry State
: Enable
4. Click
Add
. The DL-Management SF will be added to the
QoS Service Flow Table
.
B. Configure the Uplink Service Flow
1. Remaining on the
Service Flow Entry Add
page, enter the following parameters:
•
SF Name
: UL-Management
•
SF Schd Type
: RtPS
•
SF Direction
: Uplink
•
MIR
: 1000
•
CIR
: 1000
•
Latency
: 20
•
Jitter
: 10