manualshive.com logo in svg

Proxim Tsunami QuickBridge 2454-R, Installation Manual

Share
Download
Proxim Tsunami QuickBridge 2454-R Installation Manual Download Page 104

Configuration

QB.11-R Installation and Management

VLAN Parameters (BSU Only; Bridge Mode Only)

104

Add SU Table Entries

To add entries to the SU VLAN Table, click the

 Add Table Entries

 button. Enter the desired parameters in the 

corresponding fields, then click 

Add

 to add and save the entry.

The following parameters are configurable:

•

MAC: 

Enter the MAC address of the SU to be configured.

•

SU VLAN Mode: 

The SU VLAN mode can be either Transparent, Trunk, Access, or Mixed (by default, the SU is in 

Transparent mode).
–

When the BSU is in Transparent mode, the SU must be in Transparent mode.

–

When the BSU is in Trunk mode, the SU must be in either Access mode or Trunk mode.

–

When the BSU is in Mixed mode, the SU can be in Mixed, Access, or Trunk mode.

NOTE:

When the BSU is changed to Trunk mode, all the configured SUs are changed to Trunk mode by default.

Summary of Contents for Tsunami QuickBridge 2454-R











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands