ORiNOCO Wireless Client
User Guide
Chapter 2 Installation
12
Safety Requirements
North America
UL 60950 Ver.3 for USA, CSA C22.2 for Canada
Europe
EN
60950
ESD Requirement
ORiNOCO Wireless Client must withstand 15KV test voltage of electrostatic discharge under
operational conditions.
2-2 Windows ME and Windows 98 SE Installation CD Requirement
Before beginning the installation of an ORiNOCO Wireless Client, confirm that you have a
Windows 98 SE or Windows ME installation CD available (depending on the computer’s
operating system). Windows 98/ME users may be prompted to insert a Windows CD during the
installation. You should not need a Windows CD when installing the card in a Windows XP or
Windows 2000 computer.
If you do not have a Windows 98/ME CD, it is possible that you already have the Windows
installation files on your hard drive. These Windows installation files are known as Windows
Cabinet or CAB files. The Cabinet files are commonly located at:
C:\WINDOWS\OPTIONS\INSTALL\
or
C:\WINDOWS\OPTIONS\CABS\
.
Windows 98/ME users may need the Windows CD or Cabinet
files to complete the installation of an ORiNOCO Wireless Client.
Proxim recommends that you do not proceed with the installation
until you have confirmed that you have one of these Windows
installation media available.
2-3 Proxim Client Utility Installation
The instructions below describe how to install an ORiNOCO Wireless Client by running the
ORiNOCO Installation program before inserting the card into the computer. It is recommended
that you insert the card after the setup and configuration procedure is completed.
Follow these steps to install an ORiNOCO Wireless Client in a Window 98 SE, Windows ME,
