35
ORiNOCO AP-600
User Guide
3
Status Information
•
Logging into the HTTP Interface
•
System Status
Logging into the HTTP Interface
Once the AP has a valid IP Address and an Ethernet connection, you may use your web browser to monitor the
system status.
Follow these steps to monitor an AP’s operating statistics using the HTTP interface:
1. Open a Web browser on a network computer.
NOTE
The HTTP interface supports the following Web browser:
•
Microsoft Internet Explorer 6 with Service Pack 1 or later
•
Netscape 6.1 or later
2. If necessary, disable the Internet proxy settings. For Internet Explorer users, follow these steps:
–
Select
Tools > Internet Options...
.
–
Click the
Connections
tab.
–
Click
LAN Settings...
.
–
If necessary, remove the check mark from the
Use a proxy server
box.
–
Click
OK
twice to save your changes and return to Internet Explorer.
3. Enter the Access Point’s IP address in the browser’s
Address
field and press
Enter
.
NOTE
The default IP address of the AP is
169.254.128.132
.
–
Result: The
Enter Network Password
screen appears.
4. Enter the HTTP password in the
Password
field and click
OK
. Leave the
User Name
field blank. (By default, the
HTTP password is “public”).
–
Result: The
System Status
screen appears.
Figure 3-1
Enter Network Password Screen
